Homepage

At the early stage of RO-BOIS-TIC (start-up founded in January 2012) CNC Automation and it’s president Andrew Legault were truly believers of the RO-BOIS-TIC vision, meaning ‘’lights out manufacturing’’. He pledged to put his company’s full technical support behind the project. CNC Automation supplied the three key pieces of panel processing equipment… router, edgebander and drill & dowel inserter. The key to the robotic line’s success was getting all of these components to work in harmony and like clockwork, that is now a reality in 2013.

At Avondale we use Cnc Automation as our primary EQUIPTMENT dealer.  Why ? It’s all about service. When nested based cutting became mainstream about 14 years ago we chose CNC Automation to implement a nested based Thermwood CNC . The reason was that they would do the machine and software install, and be responsible for it coming on line. I should add, at that time very very few equipment dealers handled turnkey installing. . The other reason was that we knew that with a American machine such has Thermwood we could get parts normally within 24hrs and 48hrs on the outside.  The project was 100% successful !! Over the years The CNC automation team has really been like family and friends . OK maybe we bought our friendship ha ha  :), but on the serious side,  they always come through and that’s what counts. After the CNC was paid for I could not withstand prosperity,  so we decided to go deeper into automation. With CNC Automation’s help we invested in a Lowes sander and a paper belt flatline finishing system. Keep on mind we are only a 15 man shop, I had to go to 150 man shops to see these working. Avondale was likely the 1st small shop in North America to put both of these into a factory of our size. The implantation was tedious to say the least , but CNC Automation helped us every step of the way. Day 1-my plan was a 5yr break even- day 200 well maybe 10yr break even and it was looking like I would need a lot of luck to hold to that. . Now at day 1000 it looks like we are full year ahead of a five year payback. Life is good and so is CNC Automation